Stainless Steel Mesh Belt
Wire mesh conveyor belts for drying, cooling and food processing.
SXD Industrial supplies stainless steel mesh belts with stable running, open area ventilation and custom edge structure for conveyor systems and OEM equipment.
Mesh belt types and applications
We support balanced weave mesh belts, herringbone mesh belts, ladder belts, compound balanced belts and chain edge mesh belts. The belt can be matched with sprockets, guide rails, conveyor frame and motor drive.
Tell us the product size, temperature, load, belt width and conveyor speed. We will recommend a mesh structure that balances strength, ventilation and product support.
- Open mesh design for airflow, water drainage and heat transfer
- Custom width, wire diameter, pitch, edge loop and chain edge options
- Suitable for baking, washing, cooling, drying and heat treatment lines
- Available as belt replacement or complete mesh belt conveyor
Technical data 技术参数
Standard specification range for stainless steel mesh belts常规规格范围
Use this table to check whether your requirement falls inside our regular range before sending an enquiry.超出下表的尺寸可按图纸或样品评估后报价。
| Parameter / 参数 | Standard range / 常规范围 | How to choose / 选型说明 |
|---|---|---|
| Material / 材质 | SS304, SS316, 310S | SS304 general purpose; SS316 for corrosion; 310S for high temperature. |
| Wire diameter d / 丝径 | 0.8 – 4.0 mm | Larger diameter raises strength but reduces open area and flexibility. |
| Mesh opening A × B / 网孔 | 3 × 3 mm up to 30 × 40 mm | The opening must stay smaller than the smallest product dimension. |
| Pitch P / 节距 | 12.7 / 19.05 / 25.4 / 31.75 / 38.1 / 50.8 mm | Determines sprocket size and the number of teeth engaged. |
| Belt width W / 带宽 | 200 – 4000 mm | Wide belts may need a chain edge or reinforced rods to keep tracking. |
| Belt length / 带长 | Up to 60 m in one piece | Longer lines can be built with joints; confirm splice method in advance. |
| Edge structure / 边部结构 | Welded edge, chain edge, reinforced rod, bent edge | Welded edge is economical; chain edge is required for positive drive. |
| Working temperature / 工作温度 | SS304 ≤ 550 °C, SS316 ≤ 550 °C, 310S ≤ 1000 °C | For radiant or cyclic heating, derate the allowable temperature by about 10 %. |
Selection guide 选型对照
Which mesh structure fits your process?按工况快速选型
| Working condition / 工况 | Recommended / 推荐型号 | Reason / 理由 |
|---|---|---|
| Baking or drying with strong airflow | Herringbone mesh belt | Open structure gives the best air circulation and even heat distribution. |
| General transfer and moderate load | Balanced weave belt | The most economical all-round structure with good straight running. |
| Heavy duty or shock loading | Compound balanced belt | Multiple spirals per pitch increase the tensile strength significantly. |
| Small parts, nuts, or thin slices | Fine mesh / compound balanced | Small opening prevents product from dropping through the belt. |
| Wet, acidic or wash-down lines | SS316 mesh belt | Better pitting resistance against chlorides and cleaning chemicals. |
| Furnace or brazing above 550 °C | 310S mesh belt | High chromium and nickel content resists oxidation at high temperature. |
Not sure which row matches your line? Send the product, temperature, load and line speed to sales-lxw@sxdindustrial.com and we will confirm the selection. 如不确定对应哪一行，把物料、温度、载重和线速发给我们，我们会确认选型。